Last Revised
AST RESEARCH, INC. TECHNICAL BULLETIN # 1782 11/25/97
TITLE: Ascentia A, A+, DOS Programs
ISSUE
When running a DOS communication application on an Ascentia A or
A+ system, using a PCMCIA or
external serial modem, the data transfer may be very slow.
This issue may affect the following systems: 503149, 503297,
503151, 503150, 503255, 503375, and 503377.
BACKGROUND
N/A
ACTION
To resolve these issues, perform the following:
1. Obtain file SYSINIT.COM from one of AST's On-Line!
services as follows:
AST WWW Site: http://www.ast.com
AST On-Line! BBS*: See IB0001.TXT
CompuServe: GO: ASTFORUM
Prodigy: JUMP: ASTSUPPORT
2. Copy the file to the root directory.
3. Using a text editor such as NOTEPAD, add the following
line to the AUTOEXEC.BAT file to run SYSINIT.COM on
startup,
C:\SYSINIT.COM
4. Reboot the system.
NOTES
N/A
TAN TPR 1733DR
---------------------------------------------------------------------
The information in this data sheet is subject to change without
notice. AST Research, Inc. shall not be liable for technical or
editorial errors or omissions contained herein; nor for incidental or
consequential damages resulting from the furnishing, performance,
or use of this material. This material contains information protected
by copyright. No part of this material may be reproduced in any form
without prior written consent from AST Research, Inc.
All rights reserved.
---------------------------------------------------------------------
Template Rev 02