Last Revised AST RESEARCH, INC. TECHNICAL BULLETIN # 1724 06/17/97 TITLE: Black Bars in MS Project - Ascentia P50 ISSUE Several small black horizontal lines may appear on the screen when an MS Project file is loaded on an Ascentia P50 that is running Windows 3.1x and MS Project 4.0. This issue affects the following systems: 503039, 503040, and 503041. BACKGROUND N/A ACTION To resolve the issue, perform the following steps: 1. Obtain the Cirrus Logic CL-GD7548 driver, v1.40g or later, file name 7548140G.EXE, from any of the following sources: Cirrus Logic Web site at: www.cirrus.com AST On-Line! services at: AST WWW Site: http://www.ast.com AST On-Line! BBS*: See IB0001.TXT CompuServe: GO: ASTFORUM Prodigy: JUMP: ASTSUPPORT * Refer to IB0001.TXT for a list of AST's international BBS numbers. To decompress this file, create a temporary directory on your hard drive, copy the downloaded file to that directory, and run the file. 2. Install the drivers from Windows 3.1x by selecting File, Run, then type A:\Install and press the key. Follow the instructions on the screen. NOTES N/A TAN 001258RB, 003243PS --------------------------------------------------------------------- The information in this data sheet is subject to change without notice. AST Research, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. This material contains information protected by copyright. No part of this material may be reproduced in any form without prior written consent from AST Research, Inc. All rights reserved. --------------------------------------------------------------------- Template Rev 02