AST RESEARCH, INC. TECHNICAL BULLETIN # 1524 6-28-96 TITLE: 12.34/12.35 Config Error Premmia GX SUMMARY When using the Sound Blaster AWE 32 Plug-and-Play (PnP) sound card in a Premmia GX, the system may display error 12.34 or 12.35 on boot up. This issue affects the following systems: 501522, 501733, 501842, and 501843. ISSUE The Premmia GX system reports system resource errors 12.34 or 12.35. The EISACU (EISA Configuration Utility), software version 1.09, saves the configuration incorrectly for this particular Setup. BACKGROUND EISACU version 1.09 is not designed to run on the Premmia GX. ACTION 1. Use version 1.08 of EISACU. File 11371039.EXE is available for download from one of AST's On-Line! services as follows: AST WWW Site: http://www.ast.com AST On-Line! BBS*: See IB0001.TXT CompuServe: GO: ASTFORUM Prodigy: Jump: AST Support To decompress this file, create a temporary directory on your hard drive, copy the downloaded file to that directory, and run the file. and 2. Download file CTCMBBS.EXE from Creative Labs' web site at the following address http://www.creaf.com/wwwnew/tech/ftp/ftp-pat.html to configure the Sound Blaster AWE32 PnP sound card. For additional information on the EISACU for the Premmia GX system, see Software Bulletin # 0319SB.TXT. NOTES N/A TAN 1559FD and 1330JC --------------------------------------------------------------------- The information in this data sheet is subject to change without notice. AST Research, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. This material contains information protected by copyright. No part of this material may be reproduced in any form without prior written consent from AST Research, Inc. All rights reserved. ---------------------------------------------------------------------