Date: Wed, 24 Dec 2003 11:58:29 -0500
From: Jason Carr <jason@flacid.org>
To: jsun@junsun.net
Subject: Prism flash story

Hello,

I'm currently using a Netgear MA311 PCI wireless card on my Linux
server.  I was sucessful in upgrading my firmware after following
the steps outlined on your webpage.  My orignal versions were Pri
1.0.7 and Sta 1.3.6, which I upgraded to 1.1.1 and 1.7.4
respetively.

root@dexedrine [/usr/src/hostap/hostap-utils-0.1.2] (204) % ./hostap_diag wlan0
Host AP driver diagnostics information for 'wlan0'

NICID: id=0x8013 v1.0.0 (PRISM II (2.5) Mini-PCI (SST parallel flash))
PRIID: id=0x0015 v1.0.7
STAID: id=0x001f v1.3.6 (station firmware)

root@dexedrine [/usr/src/hostap/hostap-utils-0.1.2] (207) % ./prism2_srec -v -f
+wlan0 firmware/pk010101.hex firmware/sf010704.hex

Downloading to non-volatile memory (flash).
Note! This can take about 30 seconds. Do _not_ remove card during download.
OK.
Components after download:
  NICID: 0x8013 v1.0.0
  PRIID: 0x0015 v1.1.1
  STAID: 0x001f v1.7.4

root@dexedrine [/usr/src/hostap/hostap-utils-0.1.2] (208) % lspci | grep Prism
00:0d.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev
+01)


Thanks again!

Jason