From 07aa408fccd8abe4832a7ffafce614b99af34fe4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ond=C5=99ej=20Jirman?= Date: Sat, 9 Nov 2019 23:55:48 +0100 Subject: [PATCH 106/487] ARM: dts: sun8i-a83t-tbs-a711: Add support for the vibrator motor The board has a vibrator mottor. Hook it to the input subsystem. According to the PMIC specification, LDO needs to be enabled (value 0b11) to achieve the specified max driving current of 150mA. We can't drive the motor with just GPIO mode. In GPIO mode the chip is probably just using the regular CMOS logic output circuitry (typically limited to around 20-35mA, but not specified in this datasheet). Signed-off-by: Ondrej Jirman --- arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts index 43982b106a4d..f59cc4094f56 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts @@ -99,6 +99,11 @@ }; }; + vibrator { + compatible = "gpio-vibrator"; + vcc-supply = <®_ldo_io1>; + }; + reg_gps: reg-gps { compatible = "regulator-fixed"; regulator-name = "gps"; -- 2.48.1