HP OMNIBOOK 300 AND 425 - MICROSOFT (R) 4.0 EXCEL Q&E SETUP



  ISSUE:HP OmniBook 300 and 425 - Microsoft 4.0 Excel Q&E Setup

  

  SOLUTION:This procedure describes how to custom install

              Microsoft 4.0 Excel Q&E on the HP OmniBook 300 and 425

              and requires the following:



              *  A LapLink Remote connection between the HP OmniBook

                 300 and 425 and a desktop PC

              *  Microsoft Excel for Windows v 4.0 master disks



              A LapLink Remote connection must be active between the

              HP OmniBook 300 or 425 and the desktop PC before

              continuing this procedure.  Refer to the HP OmniBook

              Operating Guide page 2-7 for information on installing

              LapLink Remote.  Record the drive letter mapping

              between the HP OmniBook 300 or 425 and the PC.  In the

              following steps, drive G:on the HP OmniBook 300 or 425

              corresponds to drive A:on the PC.  Substitute the

              appropriate drive letter for your particular system.



              1. Copy shell.dll from the desktop PC's

                 c:\windows\system directory to the \windows\system

                 subdirectory of the HP OmniBook 300 or 425.

              2. Place Microsoft Excel for Windows v 4.0 Disk 1 in

                 the desktop PC's drive A or B.

              3. On the HP OmniBook 300 or 425, enter the Program

                 Manager.

              4. From the File Menu, choose Run.

              5. Type g:\setup [Enter].

              6. If prompted, enter your name and press the [Enter]

                 key - press [C] to continue.

              7. Ensure that the setup program is installing to

                 c:\excel - press [C] to continue.

              8. When prompted, choose Custom Installation.

              9. At the Microsoft Excel Setup Options window, click

                 on all boxes except Q&E to deselect.

              10.     Choose Setup to continue.

              11.     Replace Disk 1 with Disk 5 on the PC when

                 prompted.



              The installation process will now continue without

              interruption.  Pressing [F3] on the HP OmniBook 300 or

              425 will abort the installation.  For instructions on

              using Q&E, consult your Microsoft Excel manual.

  

                  Copyright  Hewlett-Packard Co. 1996

       This information is subject to change without notice and

                 is provided "as is" with no warranty.

          Hewlett-Packard shall not be liable for any direct,

        indirect, special, incidental or consequential damages

             in connection with the use of this material.