Putting It All Back Together

Just reverse the procedure, keeping in mind a few points:

  1. 1. Make sure the PC board is resting in its slots, laying flat. If it's a little out of position, the case won't close.
  2. 2. Connect the Screen cable first, then lay the screen and keyboard on top of the bottom part of the case.
  3. 3. Make sure the Press-fit retainers in the bottom part of the case are properly aligned with the black plastic pins in the top part of the case.
  4. 4. Carefully press the cases together at the press-fit retainers (next to the MENU and = keys).
  5. 5. Make sure everything is aligned properly. Then replace screws, rubber feet, and batteries.
  6. 6. The system should now come back on. You may have to re-configure your 95LX and restore files lost in the process.

    7.