The Project Gutenberg EBook of The Blacksmith in Eighteenth-Century Williamsburg, by Anonymous This eBook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org. If you are not located in the United States, you'll have to check the laws of the country where you are located before using this ebook. Title: The Blacksmith in Eighteenth-Century Williamsburg An Account of his Life & Times and of his Craft Author: Anonymous Contributor: Harold B. Gill, Jr. Editor: Thomas K. Ford Release Date: November 21, 2018 [EBook #58318] Language: English Character set encoding: UTF-8 *** START OF THIS PROJECT GUTENBERG EBOOK BLACKSMITH IN 18TH CENTURY WILLIAMSBURG *** Produced by Stephen Hutcheson and the Online Distributed Proofreading Team at http://www.pgdp.net THE BLACKSMITH in Eighteenth-Century _WILLIAMSBURG_ An Account of his Life & Times and of his Craft _Williamsburg Craft Series_ _WILLIAMSBURG_ Published by _Colonial Williamsburg_ MCMLXXVIII _The Blacksmith in Eighteenth-Century_ Williamsburg [Illustration: Decorative capital] “Iron seemeth a simple metal, but in its nature are many mysteries,” wrote Joseph Glanvill, a seventeenth-century English churchman. To the contrary, Henry Wadsworth Longfellow, two centuries later, found nothing mysterious about the worker in iron. His brawny blacksmith (long hair and all) embodied every simple virtue: he owed money to no man, prayed in church on Sundays, and earned an honest living by the sweat of his honest brow. Longfellow may have realized that he was penning a swan song for the village blacksmith, whose forge and anvil could not last far into the factory age. Most probably, however, the poet did not think of himself as reducing to the level of small-town banality the lusty craftsman whose precursors forged thunderbolts for the gods. To primitive peoples, it seems, there has always been something supernatural about the smith. He tamed fire to his will. He turned the ores of earth into magic and invincible weapons, or into prosaically peaceful tools. He himself became a god: Osiris of Egypt, Hephaestus to the ancient Greeks, Vulcan of Roman theology, Odin in Norse myth. Or he turned into a whole race of demigods—giant Cyclops or dwarf Nibelungs—having mystical skills in metalwork. _SEEKERS FOR GOLD AND IRON_ Down through all recorded civilizations man has valued gold as the most precious of metals. Yet in every civilization since man learned to smelt and forge it, iron has in fact been the metal most valuable to him. The paradox is more apparent than real. Iron is a common metal, and (with steel) can be put to an almost unlimited variety of uses—including the working of other metals. Its real value to man is utilitarian, although it may be employed for decorative and even monetary purposes. Gold, on the other hand, although of somewhat limited usefulness, is comparatively rare and is valued more for that than for its durable beauty. It was, in part, the hope of finding gold—as the Spanish had found it in Mexico and Peru—that moved Sir Walter Raleigh to send colonizing ventures to North America. But any resource that might bring wealth to the gentlemen adventurers in London and to England itself was not to be overlooked. Thomas Hariot, one of those who reached Roanoke Island with Raleigh’s initial colonists in 1585, reported that: In two places of the countrey specially, one about fourescore, & the other six score miles from the fort or place where we dwelt, we found nere the water side the ground to be rocky, which by the triall of a Minerall man was found to hold iron richly. It is found in many places of the country els. [Illustration: _Around the edges of a brass clock face made in England about 1750 and now in the possession of Colonial Williamsburg, some unknown engraver depicted ironworking operations. Here, above the numbers 11 and 12 on the clock face, open-pit miners are shown digging and hauling ore._] Nothing further is known of these discoveries, including their exact location, for the Roanoke colony did not survive. But the settlement made in 1607 at Jamestown did endure. Sending careful instructions, the sponsoring Virginia Company of London directed the adventurers to Virginia to look not only for gold but for iron ore. Among the first group of settlers was George Read, a blacksmith, to be joined the following year by Richard Dole of the same craft, and Peter Keffer, gunsmith. No doubt some of these workers in iron—perhaps all three of them—had a hand in the experimental smelting and forging of local bog iron during Jamestown’s first year or two. Captain John Smith reported that the colony’s “best commoditie was Iron which we made into little chissels.” Archaeological excavations at Jamestown and at nearby Denbigh Plantation in recent years have disclosed the sites of what appear to have been small furnaces for smelting iron ore. At the same time, the colonists were shipping ore back to England, seven tons of iron being smelted at Bristol from Virginia ore as early as 1608. Four years later, William Strachey wrote: Sir Tho: Dale hath mencioned in his Letters to the [Worthies?] of the Councell of a goodly Iron myne, and Capt Newport hath brought home of that mettell so sufficient a tryall, as there hath bene made 16. or 17. tonne of Iron, so good as the East Indian Marchants bought that of the Virginian Company, preferring that before any other Iron of what Country soever. [Illustration: _A conjectural sketch, after Sidney King, of an earthen furnace for smelting iron. Furnaces such as this were used in England early in the seventeenth century, and similar ones may have been used at Jamestown._] In further pursuit of its determination to set up an iron industry in Virginia, the London Company advertised for blacksmiths, bellows makers, edgetool makers, cutlers, armorers, gunsmiths, iron miners, iron refiners, iron founders, hammermen, millwrights for iron mills, and colliers for charcoal making. Before the _Mayflower_ left old Plymouth with its cargo of religious refugees, more than one hundred workmen having the required skills had sailed to Virginia, some of them to set up a full-scale ironworks at Falling Creek, about sixty miles up the James River from Jamestown. How much iron was actually produced at the Falling Creek furnace and forge, whether largely pig iron, sow iron, or wrought iron, and whether consumed in the colony, shipped to England, or some of both, must remain matters of conjecture. A series of troubles plagued the project, but by 1619 the blast furnace, finery, forge, and chafery were reported to be “in some good forwardnesse, and a proofe is sent of _Iron_ made there.” Two years later a new manager was sent over, and he promised “to finish the Works & have plentiful provision of Iron ... by next Easter.” The forecast was fateful. Easter in 1622 fell on March 24. But on the morning of Good Friday, March 22, the Indians of Virginia fell on every English settlement along the James River, massacring more than 350 colonists, including 27 at Falling Creek. The redskins not only slaughtered the entire adult complement of ironworkers, but destroyed the buildings and supposedly heaved some of the machinery into the river nearby. The exact details are understandably a little vague, but the result was conclusive: the iron industry in Virginia was ended for nearly one hundred years. _EARLY IRONMASTERS_ Except for bloomeries, which could have existed in every colony, the first successful ironworks in British America began production about 1645 at Saugus, Massachusetts. (In a bloomery operation a lump of iron ore—usually bog iron—is heated until it is semimolten, and then is hammered on the anvil until most impurities have been forced out; with much labor in this manner, small quantities of excellent wrought iron can be produced.) The Saugus works have been reconstructed after careful archaeological and historical research; a sort of family resemblance is to be presumed between them and the ironworks built in Virginia early in the eighteenth century. [Illustration: _The Hammersmith ironworks on the Saugus River in Massachusetts as they are believed to have looked in 1650. Along with documentary records, extensive remains found below ground at the site—and some above—have permitted a careful rebuilding of the entire complex. Redrawn after an architectural rendering in the Saugus Museum._] Governor Alexander Spotswood re-launched the iron industry in Virginia with the financial backing of several gentlemen in the colony and in England, and with the skilled labor of immigrant ironworkers from Germany. By 1718 it appears that his Tubal works, near the confluence of the Rapidan and Rappahannock rivers, were in production, although he had not yet received the London government’s permission even to start the project. Fourteen years later Spotswood (by then out of office) told William Byrd II of Westover that iron mines and blast furnaces were operating at four locations in Virginia. Byrd visited and described those at Tubal, not far from Germanna, at Fredericksville, and at Massaponax (now called New Post) below Fredericksburg. Spotswood had an interest in the second, and was sole proprietor of the first and third, having bought out his original backers. The fourth was at Accokeek, near the Potomac, on land belonging to Augustine Washington, whose son George had just been born. Byrd, who did not get that far on his 1732 “Progress to the Mines,” nevertheless confidently reported that “Matters are very well managed there, and no expense is spared to make them profitable, which is not the case in the works I have already mentioned.” This judgment may have been accurate for all we know, but it seems unkind of Byrd to throw the only bouquet to the one place he had not seen while dropping brickbats on the men who had been so hospitable and helpful to him. His criticism was certainly well founded in one case. The furnace at Fredericksville (a place no longer on the map) had been idle the entire summer. Somewhat like the rider who was lost for want of a horseshoe nail, here the blast furnace could not operate even though ore, limestone, charcoal, waterpower, and skilled labor were all available. The missing “nail” in this case was corn. There was not enough to feed the oxen that hauled the carts that carried the ore from mine to furnace and the sows from furnace to dockside on the Rappahannock some twenty-four miles away. Byrd, who had a notion to become an ironmaster himself, was advised that a proper works required, besides an iron deposit nearby, a constant supply of waterpower to operate the bellows, easy access to deep water for shipping the output to England, at least two miles square of woodland to supply charcoal for a “moderate” furnace, and 120 slaves to do the work, including some to grow food for both men and beasts. Two bits of advice, which he recorded as follows, may have dissuaded him from taking the plunge: If all these circumstances happily concur, and you could procure honest colliers and firemen, which will be difficult to do.... The founders find it very hot work to tend the furnace, especially in summer, and are obliged to spend no small part of their earnings in strong drink to recruit their spirits. Spotswood’s Tubal works were producing, in 1723, castiron “backs and frames for Chymmes [chimneys], Potts, doggs, frying, stewing and baking pans.” But even at the time of Byrd’s trip, the output of the four Virginia furnaces consisted almost entirely of cast iron sows and pigs that were shipped to England. There was not a single forge operating in the whole of Virginia, Spotswood told Byrd. Just three years later, however, Governor William Gooch reported to the Board of Trade in London that one forge was producing bar iron. He seemed to think this was enough to satisfy the colony’s needs for iron “for agriculture and Planting, for mending as well as making tools.” How badly Gooch misjudged the local demand for wrought iron is evident in the rapid increase of forges in the following years. A number sprang up near the lower Potomac and in the Shenandoah Valley; one, called Holt’s Forge, was erected sometime before 1755 between Williamsburg and Richmond at what is now Providence Forge. Its output just before the Revolution included bar iron and such plantation supplies as plow hoes, broad hoes, hilling hoes, grubbing hoes with steel edges, nails, and axes. Legally, no colonial forge with trip hammer, rolling mill to fashion wrought iron plate, or slitting mill to turn the plate into bars could be built after Parliament passed the Iron Act of 1750. But the law seems to have had little effect, and Virginia smiths called for more and more bar iron to make farm tools and ironwork for wagons, mills, and ships. The demand was so great that most bar iron produced in the colonies was consumed by local blacksmiths. In 1764, for example, Colonel John Tayloe, who owned ironworks in King George County, found he could sell his whole output locally. Robert Carter, the planter-entrepreneur of Nomini Hall and partner in the Baltimore iron Works, sold large quantities of bar iron in Williamsburg and to blacksmiths elsewhere in Virginia. By 1770 William Hunter’s works at Falmouth, said to be the largest in America at that time, were turning one and one-half tons of pig iron into bars every day. In 1781 Thomas Jefferson, who had a small interest in three blast furnaces in his home county of Albermarle and who later owned a nail making machine and sold its output, counted eight ironworks in Virginia. He reported that they produced about 4,400 tons of pig iron and more than 900 tons of bar iron annually. _THE COUNTRY BLACKSMITH_ Two blacksmiths and a gunsmith, as we have seen, came to Jamestown with the earliest settlers, recruited for the obvious reason that their crafts were vital to the survival of any settlement in the wilderness. From the start, both the London Company and the colonial assembly tried to persuade smiths to migrate, and, when they reached the New World, to practice their craft. By way of encouragement, the assembly exempted from taxes and levies artisans who engaged in their crafts and did not plant tobacco. In 1657, in order to assure smiths, tanners, and weavers ample raw materials to work with, it forbade the exportation of iron, hides, and wool. This latter law had a checkered career: it was repealed the next year, reenacted two years later, repealed as a failure after eleven years, reenacted once more after another eleven years, and immediately repealed by royal order as a threat to the trade and commerce of England. Through it all the supply of working smiths remained small in the colony of Virginia, and their charges skyrocketed. The county courts were given regulatory powers “by reason of the unconscionable rates, [that] smiths do exact on the inhabitants of this countrey for their worke.” Later and for another reason—the runaway inflation that accompanied the Revolution—prices of many commodities were commonly fixed. For instance, the price of bar iron (a consumer item for smiths) was set by a Williamsburg town meeting of July 16, 1779, at 800 shillings per ton and eightpence per pound “for the present month.” [Illustration: _Shown in this illustration from Joseph Moxon’s Mechanick Exercises, published in several eighteenth-century editions in London, are the basic pieces of equipment in a blacksmith’s shop—then and since. Actually, the bellows connection shown is faulty: the draft must come up through the firebed, not blow across the top of it._] Actually the greatest obstacles to the growth in seventeenth-century Virginia of any large manufactory of iron and steel articles were the scarcities of cash money and, even more simply, of towns. Hartwell, Blair, and Chilton, in their report to the London Board of Trade, entitled _The Present State of Virginia, and the College_, described the situation in 1697: For want of Towns, Markets, and Money, there is but little Encouragement for Tradesmen and Artificers, and therefore little Choice of them, and their Labour very dear in the Country. A Tradesman having no Opportunity of a Market where he can buy Meat, Milk, Corn, and all other things, must either make Corn, keep Cows, and raise Stocks himself, or must ride about the Country to buy Meat and Corn where he can find it; and then is puzzled to find Carriers, Drovers, Butchers, Salting (for he can’t buy one Joynt or two) and a great many other Things, which there would be no Occasion for, if there were Towns and Markets. Then a great deal of the Tradesman’s Time being necessarily spent in going and coming to and from his Work, in dispers’d Country Plantations, and his Pay being generally in straggling Parcels of Tobacco, the Collection whereof costs about 10 per Cent. and the best of this Pay coming but once a Year, so that he cannot turn his Hand frequently with a small Stock, as Tradesmen do in England and elsewhere, all this occasions the Dearth of all Tradesmen’s Labour, and likewise the Discouragement, Scarcity, and Insufficiency of Tradesmen. When James Blair and his co-authors wrote of the difficulties faced by artificers, Williamsburg was about to be made the capital of the Virginia colony. Seventy years later Williamsburg was enjoying the height of its golden age—but the soil continued less than fertile for the growth of large-scale and urban iron workshops. Governor Fauquier reported to the board of Trade in 1766: There is but one manufactory of the least importance carried on in this Colony, which is, the making of Iron both in pigs and barrs, which receives no publick encouragement, and which when made is chiefly exported to Great Britain. But ... every gentleman of much property in land and negroes have some of their own negroes bred up in the trade of blacksmiths, and make axes, hoes, ploughshares, and such kind of coarse work for the use of their plantations. I do not know that there is a white-smith or maker of cutlery in the Colony. Fauquier’s report may be discounted as a politically motivated effort to allay the home government’s suspicions that the colonists were engaging too heavily in iron manufacture. As a matter of fact, there was a whitesmith (that is, tinsmith or worker in white metal) by the name of John Bell in Williamsburg at the time Fauquier wrote. Records of the period mention cutlers at work in Williamsburg and elsewhere in the colony. But the point of paramount significance in his report lies in the undeniable fact that agricultural blacksmithing—and Virginia was an almost entirely agricultural colony—took place on the individual plantations. In addition to Negro slaves, some indentured servants, free journeymen, and master craftsmen—the latter occasionally itinerant—could be found working at their craft on farms throughout the colony. Robert Carter, member of the council and sometime owner of a large home next to the Governor’s Palace in Williamsburg, had workers on his plantations, white and black apparently, trained as coopers, carpenters, weavers, blacksmiths, millers, sailors, bricklayers, shoemakers, and in other skills. He sold iron articles made on his Nomini Hall plantation to his neighbors for cash or produce—such items as hoes, axes, plows, and nails. Although Carter was by no means typical, he being one of Virginia’s wealthiest and most successful farm entrepreneurs, the example of plantation blacksmithing could be repeated many times over. An instance of the availability of indentured servants is found in the 1773 advertisement of James Mills in the _Virginia Gazette_: Just arrived the _Success’s Increase_, Captain _Curtis_, with about eighty choice healthy Servants, among whom are many Tradesmen, viz. Shoemakers, Weavers, Carpenters, Black and White Smiths, Tailers, a Sailmaker, a Tanner, a Glazier and Painter, a Bricklayer, a Brass Founder, a Turner, an Upholsterer, Surgeons, and Apothecaries, Hair Dressers, Schoolmasters and Book-Keepers, with many Farmers, Labourers, &c. &c. The sale will commence at _Leeds_ Town, on Monday the 3d of _January_ and will continue till all are sold. Reasonable Credit will be allowed.... Tobacco will be taken in Payment for the above. John Tait, another planter, wrote to England for a blacksmith who was “accustomed to coarse Country work,” such as hoes and axes, to be indentured for four or five years and to receive £10 sterling per year in wages, plus “meat, drink, washing & lodging.” Francis Jerdone, a planter and merchant of Louisa County, had an indentured servant who did all of the plantation’s blacksmithing and also brought in as much £7 in one month of 1767 for work done for neighboring farmers. The following bill of John Cock indicates the kinds of work done by rural Virginia blacksmiths and the prices they charged in 1759: To making Niles and Shuing one whele 0 12 6 To making a hoop one Staple and two Rings and 0 5 6 Rivating the wheles by J. L. 1759 January 4 To Shuing a pr of five foot and a half wheles and 3 0 0 Rivating them Round A. L. 9 To making 5 Staples 1 Ring and 3 goosnecks 0 9 0 12 To making 5 Staples for the yokes & bees 0 4 0 To making 3 hooks and 6 Rings 0 5 0 To making 1 large Ring 0 1 0 To making 8 small pins & Cuting a Chane and 0 3 6 making a traces 20 To making 4 hooks and 4 Rings 0 4 0 To making an ox chane 0 7 6 To Lanthing an ox Chane and making a Staple and 0 2 0 Ring To making a ploug Large 0 6 0 To making an ax 0 2 0 F.1 To making three axes one of my iron 0 6 6 12 To Cuting a plough hoe 0 3 9 21 To Laying Eight hilling hoes 0 12 0 24 To Laying a fluck hoe of my iron 0 4 6 To making a plough of my iron 0 10 0 To making 3 hilling hoes 0 4 6 To making 5 hilling hoes 0 7 6 £8 10 9 _THE VILLAGE BLACKSMITH_ When the Virginia Assembly first met in 1699 at Middle Plantation (soon to be renamed Williamsburg), its members listened to speeches delivered by several students at the brand new College of William and Mary. Urging that the colony’s capital should be moved thence from Jamestown, one of the students pointed out that Middle Plantation already contained “as many substantial housekeepers ... as is to be found again in the whole County.” He specifically listed a smith’s shop as one of several “great helps and advances made towards the beginning of a town.” Despite the young speaker’s effort to make it sound impressive, Middle Plantation was far from being a town by any stretch of the word. But it was no accident that a mere scraggle of structures in a landscape of woods and fields included a smithy. As in the first years at Jamestown, the presence of a blacksmith to make and mend tools was essential to the success of the settlement. Unfortunately, nothing is known of the identity of that first Williamsburg smith—not his name, or the exact location of his shop, or the kind of work he did. [Illustration: _The Brush-Everard House is one of some eighty original structures now restored to their colonial appearance in Williamsburg._] John Brush was the earliest Williamsburg smith whose name is known today. He was primarily a gunsmith and armorer, but may have done blacksmithing too. He bought two lots in the shadow of the Governor’s Palace in 1717, and the modest home he built there (later enlarged by Thomas Everard) still stands on Palace Green. So far as surviving records have revealed, he was followed by no more than fourteen individuals over the next three-quarters of a century who worked iron and steel in one or more of the smithy crafts: blacksmith, gunsmith, locksmith, cutler, nailmaker, and farrier. Only fourteen. Even granting the possibility that some blacksmiths never left their name or mark in a written record, this seems remarkably few for so long a period in one of Virginia’s chief towns. The small number can probably be taken as another indication that most of the colony’s smiths—like eighty to ninety percent of its population—lived and worked in the country. Surviving advertisements, invoices, and inventories of Williamsburg blacksmiths suggest that the work they did was of a somewhat different nature from that of the rural smith. The following extracts from account books of James Anderson and Thomas Pate indicate something of the urban variety: 1771 Mr. Henry Morse Dr to James Anderson Jan 22 To Cleaning 3 guns @ 3/ 1 9 0 March 22 To Cleaning 3 Do @ 3/ 0 9 0 August 28 To plating Chair Shafts ? ? 3 To mendg a spring 0 2 6 1772 May 25 To a New tumbler pr lock 0 2 6 June 3 To Mending Bridle Bitt 0 0 7½ 7 To Mending a Chair 0 2 6 July 30 To Altering a spring 0 3 9 To Do 2 bolts 0 1 3 May 18 To feeding 2 horses 20 days @ 4/ 4 0 0 To laing axletree pr Chair 0 15 0 To 3 Tiar Nails @ 1½d 0 0 4½ To pr Clamps pr Wheels 0 2 6 July 5 To 2 gallons oats 0 1 3 Decmb 7 To a key pr lock 2/6 mendg lock 1/3 0 3 9 .... 1774 Jany 18 To a Nutt for Chair 0 0 7½ Augt 22 To 8 Dog Nails 8d Cleang a Gun 2/6 0 3 2 1775 May 17 To a Key for a lock 0 2 6 Work done for the Capitol By James Anderson 1773 May 24 To Cleaning a Stove 1 0 0 July 26 To 4 Bars prs Statue 2 4 5 Octr 3 To 3 Bars prl Doors @ 2/6 0 7 6 To 4 Do @ 5/ . 20 mendg a hinge 2/6 1 2 6 4 To Eight hooks @ 7½ 0 5 0 15 To 2 Keys prs locks @ 3/9 0 7 6 To a Box prs do 0 1 6 1773 Country Dr Apr 25 To half a Year Salary as Armourer to the Magazine £10 1760 Collo Custis Estate to Thos Pate Dr. Feb. 11 To lenthening a Chain and mending a Bed pin for £0 3 0 Cart To altering a Sett of Clamps Do 0 2 6 19 To Pointing a Plough 0 2 6 22 To Making a Screw key for the mill 0 2 6 23 To Mending 2 Keys for Locks 0 2 6 27 To Making 2 Bed pins and 2 Linch pins for Cart 0 6 3 To making Cleavey and Pin Do 0 3 9 To making Iron work for a Ox yoke 0 5 0 March 5 To Making a Ox Chain 0 10 6 To making Iron Work for a Ox Yoke 0 3 9 11 To Altering 3 Mill Hoops 0 3 9 April 4 To mending a Lock and Key 0 2 0 26 To Altring a Mill Spindle 0 5 0 May 1 To Pointing a fluke hoe 0 2 6 2 To Making 2 Wedges for the Mill 0 2 6 7 To Mending a Sane 0 1 3 30 To Pointing a fluke hoe 0 2 6 June 3 To Dressing 3 mill Peaks and Lengthening a crane 0 5 0 30 To Pointing a fluke hoe 0 2 6 July 5 To Making a Hoope for Mill 10 pounds 0 7 8 To making 2 Wedges Do 0 2 6 11 To mending a Broad Ax 0 1 3 24 To mending a Key for a Lock 0 0 7½ Novm 17 To making a box for a whip saw 0 3 9 1761 Feb. 3 To making 2 peed pins for Small Cart 0 2 6 9 To Mending a Lock 0 1 3 It will be noticed that Pate made or repaired several items “for the mill.” No doubt this was the windmill shown on the “Frenchman’s Map” of 1782 as standing on or near Custis’s property to the south of town. The millwright, the wheelwright, the coachmaker, and the shipwright all depended heavily on the blacksmith to produce essential parts of their respective products. The builder of houses, too, could do little without the nails and the tools that came from the local smithy. However, when the “public hospital, for persons of insane and disordered minds” was built in Williamsburg in 1771, the removable iron gratings and padlocks to be installed at all the windows were imported from England. For this large specialty job, even James Anderson, the town’s foremost smith, was passed over. Similarly, wrought-iron gates and balconies on the public buildings of Williamsburg appear to have been ordered from England. The Capitol was to have “on each Side ... an Iron Balcony upon the first Floor,” and the assembly explicitly empowered the overseers in charge of building both the first Capitol and the Governor’s Palace to send to England for ironwork, glass, and other materials necessary. Likewise, the elaborate gates at Westover plantation were made for William Byrd II in England. A “Set of Iron Palisades and Gates curiously wrought,” sold as part of a prize cargo in Norfolk in 1748, probably came from France. When the House of Burgesses in 1768 commissioned a statue of the beloved Governor Botetourt, the sculptor, Richard Hayward of London, was also to provide the iron railing that surrounded the base of the statue when it was set up in the portico of the Capitol. One reason for importing ironwork for these large jobs may have been that local smiths were not equipped to handle them; more likely, the importation was politically wise since manufacturing in the colonies was discouraged by the British government. [Illustration: _Ornamental ironwork is less characteristic of the colonial Virginia scene than of Charleston, South Carolina, and New Orleans. Nevertheless, there are some survivals, none finer than these two gates at Westover plantation on the James River._] _TOOLS AND TECHNIQUES_ The bills and accounts quoted a few pages back, and others, give ample evidence that most colonial smiths could read and write—although their spelling (like George Washington’s) might have a way of its own. At least one Williamsburg blacksmith, Hugh Orr, seems to have been quite a reader; at his death in 1764 he left a library of about forty books. But neither he nor any other colonial smith sat down to write out and illustrate a description of the work he did and how he did it. This is not intended to be a how-to-do-it manual either. A few pages of text and pictures can hardly substitute for the apprenticeship of as much as seven years through which a blacksmith gained mastery of his craft. Only the close daily supervision of an expert and years of practice will enable a smith to know when the eye of his fire is large enough—but not too large ... when the forced draft of his bellows has made the fire hot enough—but not too hot ... when his iron is red enough—but not too red ... when his hammer blows fall heavily enough—but not too heavily to accomplish the particular job at hand. Readers unfamiliar with the processes and products of a smithy are likely to be strangers also to many of the smith’s tools—which makes for something of a problem in trying to describe them. For this and other reasons it seems wise to start with what may be the most familiar items today. _Nails._ In the early years of the Jamestown colony land was plentiful and nails were scarce. They, like every other object of iron—except the “little chissels” mentioned by Captain John Smith—had to be brought over from England. When the soil of their tobacco fields was worn out, planters simply took up, cleared, and planted new land farther west. Sometimes they set fire to buildings on the abandoned land in order to salvage the nails for re-use, a practice that was forbidden by law in 1644. However, nails were not difficult to make if one had a supply of wrought-iron rods and a few tools. Frontier farmers—which in eighteenth-century Virginia meant those living one or two hundred miles to the west of Williamsburg—sometimes spent winter days in nailmaking. The fireplace served as forge, and even the younger members of the family could wield tongs, hammers, and cold chisel or man the vise. [Illustration: _Nails and tacks of various sizes and shapes and for various special uses, from Diderot’s encyclopedia. Figure 14 at the lower right is a wheel nail, for example._] Where there was a blacksmith, as we have already seen, he—or more likely his apprentice—made the nails. James Anderson estimated that eight boys could turn out twenty-five thousand nails in a week. Isaac Zane, who had an ironworks in the neighborhood of Winchester, owned “17 nailors tools great & small” and “2 nailors anvills.” The smith probably started with iron several feet long, about one-quarter-inch in width and the same thickness, produced in a slitting mill. His first procedure was to draw them down—and here we come to the first terminological stumbling block. Drawing down (or drawing out or beating out) is the smith’s phrase for thinning and lengthening a piece of metal by heating and hammering it. The contrary process of thickening—by hammering on the end of a rod—is called upsetting and is the technique used in making the head of the nail. Before he did that, though, the smith, having drawn down the rod to the proper thickness for the nails to be made, cut them to the desired length. Most likely he did this on a hardie, which is like a chisel held with the point upward in the square hardie hole of the anvil. _Horseshoes._ Hugh Jones in 1724 wrote that horseshoes were “seldom used in the lower part of the country, where there are few stones.” It is true that the soil of tidewater Virginia tends to be sandy and free of stones, so that horses could and did go unshod much of the time. Yet there is ample evidence—some of which we have seen in the accounts excerpted above—that blacksmiths and farriers worked in the Williamsburg area at making and mounting horseshoes. [Illustration: _The forge of Master Delafosse, royal farrier, in Paris in the mid-eighteenth century. From Diderot’s encyclopedia._] A smith who made, fitted, and applied shoes to horses, mules, and oxen was properly called a farrier. The trade demands knowledge and skill in handling iron, and also knowledge and skill in handling the animals being shod. Because of his close familiarity with these animals, his “horse sense,” so to speak, the farrier often served the function of veterinarian too. More often, however, it was the blacksmith who also served as farrier. Horseshoes were made from bar iron, and they were normally custom made to fit not just a particular horse, but a particular one of his feet. Each shoe of a set of four will differ in one or more respects—size, shape, or weight—from its fellows, and each set may differ from others depending on the type of horse involved—draft, riding, carriage, etc.—and the condition of surface on which the shoes are to be used—ice, mud, stone, etc. In addition, special shoes can correct defects in gait, guard against lameness, and the like. To describe how a smith made all of these possible variations is no part of this booklet. Suffice it to say that in the making of a horseshoe all of the blacksmith’s basic tools come into use: forge, anvil, tongs, and vise. Some attention to each of these in turn will help to round out an understanding of the workings of the smithy. _Forge._ The blacksmith’s forge, which he sometimes calls his fire, is the most important feature of his shop. It consists of a square hearth, usually raised about two and one-half feet and made of brick, with a bellows at the side or back to blow the fire, a hood or hovel above to carry smoke and fumes away, and a trough or tub of water close by in which to quench the iron or cool the tongs. The fire itself, of coal rather than charcoal, is always small and concentrated, a few inches across in the center of a hearth that may be four or five feet square. Around it lies unburnt fuel that the smith can handily bring closer when needed. With his slice—a long-handled, light-weight shovel—his fire-hook—a similarly long-handled rake—and his washer—a bunch of twigs to flick water around the fire—he carefully manages the size and depth of the fire. With the bellows he regulates its intensity. The blacksmith must be able to judge when his stock is hot enough, and he does it by eye, the right degree of heat for a particular operation being revealed by the color of the iron. Blood-red heat is called for when the iron is not to be reshaped but only the surface to be smoothed. Flame heat or white heat is necessary when the work is to be hammered to a different shape, drawn down, or upset. Sparkling heat or welding heat is used only for the delicate and highly skilled process of welding. _Anvil._ This is hardly less important to the smith than the forge, as he does practically all of his work on it. The common smith’s anvil, made of cast or wrought iron, may weigh up to about three hundred pounds. It has had the same basic shape since ancient times, each of its features being functionally tried and perfected ages ago. The anvil’s upper surface, called the face, is flat, smooth, so hard that a file will not cut it, and made of cast steel welded to the wrought iron body. One end of the anvil is a cone-shaped projection called the horn (also called beak, bick, bickern, or pike), used to work curved or rounded pieces of iron such as rings, links, or shackles. Between the horn and the face of the anvil is a small square area called the table. Its surface is not as hard as that of the face, and the smith places on it any work he wants to cut with a cold chisel. Near the other end or heel of the anvil are two holes, one round, called the pritchel hole, and the other square, called the hardie hole. When the smith intends to punch a hole through a piece of metal, he positions it over the pritchel hole so that the punch will pass into the hole rather than strike the face of the anvil. The hardie hole (also called the swage hole) is designed to take the square shanks of a variety of special-purpose bottom tools—which make their impact on the underside of the work when the smith strikes it from above. _Tongs._ Iron being a metal that transmits heat readily, the blacksmith often cannot hold the piece he is working on, even with a gloved hand. He needs tongs to do the holding, and because of the differing shape of different objects being worked, he needs a variety of tongs of different shapes and sizes. These he ordinarily makes himself. John Brush of Williamsburg, for instance, owned “7 pair of Smiths Tongs.” _Hammers._ It has already been said that the smith’s forge and anvil are among his essential tools. So is his hammer—or rather hammers, for he needs several of different shapes and weights, as well as a sledge or two. [Illustration: _A small selection of tools such as would be found in almost any blacksmith’s shop: fire tools, tongs, pincer, hammers, chisels, stamps, and stakes or hardies. From Diderot._] _Vises._ Smiths’ vises are of two types, the large standing vise, used to hold iron for bending, riveting, filing, or polishing, and the small or hand vise to hold work of similar size. In both cases the work will have already undergone the major part of its forming on the anvil, and the vise comes into use almost solely for finishing operations. Other tools that have particular uses may be no less important to the smith when he has occasion to use them. Among them may be mentioned drills, swages, swage blocks, hardies, stakes, punches, cold chisels, files, screw plates, flatter, fuller, header, and mandrel. It is recommended to the reader who wants to know the nature and uses of these and other tools in a smithy that he become an apprentice to the nearest blacksmith; there is no better way to learn. Certainly no one can learn to anneal, braze, case-harden, temper, lay, and weld iron just by reading about it. But we can at least offer some definitions: _Annealing_ is the process of softening steel so that it can be worked by cutting tools. It is done by heating the piece in the fire to blood-red heat, then allowing it to cool slowly. _Brazing_ joins together two or more pieces of metal by the use of a brass solder, called spelter. It is used when the pieces to be joined are too thin to be welded. _Case hardening_ is the process of hardening the outer surfaces of iron or steel, while leaving the core soft and therefore tougher. According to Joseph Moxon’s _Mechanick Exercises_ (third edition published in London in 1703) it was to be accomplished as follows: Cover the iron all over with a cement made of powdered cow horn or hoof, coarse sea salt, stale urine or white wine vinegar, and clay, with more clay added to enclose the whole; when the clay has dried hard, put the whole lump in the fire and bring it to blood-red heat, no more; then take the iron out and quench it. _Tempering_ is the opposite of annealing, in that it slightly softens and toughens iron or steel. It is accomplished by bringing the object to the proper heat—which may differ according to the {...} _Laying_ was one of the most frequent operations performed by colonial smiths. Such implements as axes, hoes, and plows usually had wooden handles and wrought-iron heads, with a strip of steel welded on to make the cutting edge or face. When the last become worn, the process of replacing it was called laying or steeling. _Welding_ two pieces of iron is at the same time very simple in theory and very difficult in fact. At the proper heat the two pieces placed firmly face to face will—if the faces are clean—stick together without further ado. But accomplishing this feat requires great skill with the fire and great quickness with the hammer so that scale will not form on the surfaces to be welded. Normally the weld is hammered together on the anvil to refine the grain of the metal as it cools. [Illustration: _Another farrier’s shop, no doubt drawn on the spot with tools and equipment just as they were seen by the artist. From Diderot._] _THE ESSENTIAL CRAFT_ James Anderson was described earlier in these pages as Williamsburg’s foremost blacksmith during the years when his shop occupied a lot on Francis Street. Several of his ledger books are still in existence, some of them treasured possessions of Colonial Williamsburg. Among endless entries covering the laying of axes, hoes, plows, and colters, appear others that show the less routine aspects of Anderson’s daily work: mending a poker; making a nut for a bolt of a chair (probably a riding chair); dressing two mill picks; mending a lock; altering 40 window hooks; making a hasp and staple for a henhouse; providing handle, wedges, and ring for a scythe; fixing a new end to an oyster clamp; putting a handle on a “teakittle”; forging a well chain; making a “strike tier,” i.e., strakes for wagon wheel and nails to attach them; spindle for a wheel; prong for a dung fork; putting a hoop on a barrel; mending a coffee mill; 9 “fronts” and a rib for a griddle; 50 spikes; a pair of flatirons; mending and installing locks, keys, window bars, leg irons, and chains for the “lunatick hospital”; lengthening the bearer and adding a new middle foot to an andiron; “a Sett of Iron for a dressing table”; four breast plate buckles (for a harness); drilling a gun; mending an umbrella; “triming a horse feet”; making, mending, putting on, and taking off leg irons and hand cuffs for the jail. Clearly everyone in town had to patronize the blacksmith sooner or later. He was, in a very real sense, a craftsman for all seasons. _THE BLACKSMITHS OF WILLIAMSBURG_ This list includes only the men who were primarily blacksmiths or who clearly did blacksmithing along with their work in other iron crafts. The dates designate the years when they are known to have been in Williamsburg. _James Anderson_, 1762-1798. Born in Gloucester County in 1740. Public armorer in Williamsburg from 1766, and supplier of arms to the Revolutionary forces of Virginia. His forge probably occupied the lot on Francis Street in Williamsburg next to the Barraud House. He employed a number of journeymen gunsmiths, blacksmiths, and nailers, and at one time had as many as nine apprentices. He and his shops were moved to Richmond along with other government agencies when that city became the seat of government in 1780; in 1793 he turned his Richmond shop over to his son and moved back to Williamsburg. _William Ashburn_, 1774. Advertised in April of that year that he had opened shop near the Capitol in Williamsburg. May have been in town three years earlier, but little else is known of him. _John Bell_, 1753-1776. Called himself both whitesmith and blacksmith. Served as public armorer from 1763 to 1766, when he moved to Portsmouth. _James Bird_, 1740-1758. Established his shop “in the Market Square” on land leased from the trustees of the city of Williamsburg. Was lacking both as master and as businessman: an apprentice sued in court and obtained release from his indenture; pleading that the blacksmith “misused” him, and after his creditors foreclosed the mortgage on his property, Bird departed town “in low Circumstances.” _Robert Bond_, 1761-1783. Learned blacksmithing as an apprentice in Yorktown. Bought large quantities of bar iron from Robert Carter. Worked for the state during the Revolution and got caught in a bureaucratic vise: when the British destroyed his bellows he could not, despite an order from the commissioner of war, obtain “any Lether With out the Money and i am in tylerly idle theay wont Let Me Draw any Provisions because i ant at Work and i Cant Doe anything With out my Bellus.” _John Brush_, 1717-1726. Primarily a gunsmith; may also have engaged in the blacksmith’s trade. Thought to have been a protégé of Governor Spotswood because he did “work and reparations about the Governors House,” and built his home on the Palace Green nearby. Was keeper of the public arms and those of the governor; in 1723 petitioned the legislature (in vain) for an allowance “for his misfortune in being blown up and hurt in firing the Guns on his Majtys Birthday.” _Thomas Cowles_, 1772-1775. He was a patient of Dr. John M. Galt, bought bar iron from Robert Carter, and repaired the arms of “Capt. Lynes Compy of Minute Men.” Nothing else is known of him. _John Draper_, 1769-1789. Blacksmith, farrier, and veterinary, whose shop was on Duke of Gloucester Street and who lived on the corner of Francis and Waller streets “where the Old Play House lately stood.” During the Revolution he made guns, rented out riding chairs, rode express, repaired arms, and supplied nails and shot. _James, David, and William Geddy_, 1736-about 1780. James Geddy, gunsmith, father of David and William (also of James Geddy, Jr., the silversmith), established his shop in Williamsburg sometime before 1736; he died in 1744. He and two of his sons did cutlery work, brass casting, and iron founding as well as gunsmithing; the sons also purveyed rupture bands and a vermifuge for horses, and offered to cure “the most inveterate Pole-evils and Fistulas ... and all Diseases incident to Horses.” During the Revolution William was paid for repairing arms and casting ball; he died in 1784. _John Moody_, 1776-1779. Smith and farrier, from Philadelphia by way of Norfolk, advertised his shop near the church in 1776. Was paid on several occasions for shoeing horses, but little more is known of him before his death in 1779. _Hugh Orr_, 1738-1764. Captain Orr called himself both blacksmith and “hammer man,” and settled in Williamsburg by 1738. His house and smithy were on Duke of Gloucester Street. He may have acted as farrier, and either he or a slave trained to do so performed phlebotomy—bleeding. He served as armorer for the colony for three years and may have been an officer in the Williamsburg militia. He is buried in Bruton churchyard. _Thomas Pate_, 1760-1814. Did blacksmith work for John Custis and Lord Botetourt among others, and repaired arms for Virginia troops during the Revolution. The location of his shop is not known, but his purchase of more than 3,000 pounds of bar iron from Robert Carter in 1773 alone indicates a lively trade. _William Willis_ (or _Willess_), 1768-1770. Came from Birmingham and opened his gunsmith and blacksmith shop “near the playhouse” and “below the Capitol,” but soon moved to Norfolk. _Suggestions for Further Reading_ Alex W. Bealer, _The Art of Blacksmithing_. rev. ed. New York, Funk and Wagnalls, 1976. Garry Hogg, _Hammer & Tongs: Blacksmithery Down the Ages_. London, Hutchinson Co., 1964. J. G. Holmstrom, _Modern Blacksmithing and Horseshoeing_. Chicago, F. J. Drake & Co., 1941. John Jernberg, _Forging: Manual of Practical Instruction in Hand Forging of Wrought Iron_.... Chicago, American Technical Society, 1917. William Allyn Richards, _Forging of Iron and Steel_. New York, D. Van Nostrand Co., 1915. F. W. Robins, _The Smith: The Traditions and Lore of an Ancient Craft_. London, Rider and Co., 1953. H. R. Bradley Smith, _Blacksmiths’ and Farriers’ Tools at Shelburne Museum: A History of Their Development from Forge to Factory_. Shelburne, Vt., Shelburne Museum, 1966. Albert H. Sonn, _Early American Wrought Iron_. New York, Charles Scribner’s Sons, 1928. Aldren A. Watson, _The Village Blacksmith_. New York, Thomas Y. Crowell Co., 1968. _The Blacksmith in Eighteenth-Century Williamsburg_, first published in 1971, is based largely on an unpublished monograph by Harold B. Gill, Jr., of the Colonial Williamsburg research staff. It has been prepared with the assistance of Thomas K. Ford, editor until 1976, Colonial Williamsburg Department of Publications. Transcriber’s Notes —Retained publication information from the printed edition: this eBook is public-domain in the country of publication. —Silently corrected a few palpable typos. —In the text versions only, text in italics is delimited by _underscores_. —Marked a lacuna in the original printed edition with “{...}”. End of the Project Gutenberg EBook of The Blacksmith in Eighteenth-Century Williamsburg, by Anonymous *** END OF THIS PROJECT GUTENBERG EBOOK BLACKSMITH IN 18TH CENTURY WILLIAMSBURG *** ***** This file should be named 58318-0.txt or 58318-0.zip ***** This and all associated files of various formats will be found in: http://www.gutenberg.org/5/8/3/1/58318/ Produced by Stephen Hutcheson and the Online Distributed Proofreading Team at http://www.pgdp.net Updated editions will replace the previous one--the old editions will be renamed. Creating the works from print editions not protected by U.S. copyright law means that no one owns a United States copyright in these works, so the Foundation (and you!) can copy and distribute it in the United States without permission and without paying copyright royalties. Special rules, set forth in the General Terms of Use part of this license, apply to copying and distributing Project Gutenberg-tm electronic works to protect the PROJECT GUTENBERG-tm concept and trademark. Project Gutenberg is a registered trademark, and may not be used if you charge for the eBooks, unless you receive specific permission. If you do not charge anything for copies of this eBook, complying with the rules is very easy. You may use this eBook for nearly any purpose such as creation of derivative works, reports, performances and research. They may be modified and printed and given away--you may do practically ANYTHING in the United States with eBooks not protected by U.S. copyright law. Redistribution is subject to the trademark license, especially commercial redistribution. START: FULL LICENSE THE FULL PROJECT GUTENBERG LICENSE PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK To protect the Project Gutenberg-tm mission of promoting the free distribution of electronic works, by using or distributing this work (or any other work associated in any way with the phrase "Project Gutenberg"), you agree to comply with all the terms of the Full Project Gutenberg-tm License available with this file or online at www.gutenberg.org/license. Section 1. General Terms of Use and Redistributing Project Gutenberg-tm electronic works 1.A. By reading or using any part of this Project Gutenberg-tm electronic work, you indicate that you have read, understand, agree to and accept all the terms of this license and intellectual property (trademark/copyright) agreement. If you do not agree to abide by all the terms of this agreement, you must cease using and return or destroy all copies of Project Gutenberg-tm electronic works in your possession. If you paid a fee for obtaining a copy of or access to a Project Gutenberg-tm electronic work and you do not agree to be bound by the terms of this agreement, you may obtain a refund from the person or entity to whom you paid the fee as set forth in paragraph 1.E.8. 1.B. "Project Gutenberg" is a registered trademark. It may only be used on or associated in any way with an electronic work by people who agree to be bound by the terms of this agreement. There are a few things that you can do with most Project Gutenberg-tm electronic works even without complying with the full terms of this agreement. See paragraph 1.C below. There are a lot of things you can do with Project Gutenberg-tm electronic works if you follow the terms of this agreement and help preserve free future access to Project Gutenberg-tm electronic works. See paragraph 1.E below. 1.C. The Project Gutenberg Literary Archive Foundation ("the Foundation" or PGLAF), owns a compilation copyright in the collection of Project Gutenberg-tm electronic works. Nearly all the individual works in the collection are in the public domain in the United States. If an individual work is unprotected by copyright law in the United States and you are located in the United States, we do not claim a right to prevent you from copying, distributing, performing, displaying or creating derivative works based on the work as long as all references to Project Gutenberg are removed. Of course, we hope that you will support the Project Gutenberg-tm mission of promoting free access to electronic works by freely sharing Project Gutenberg-tm works in compliance with the terms of this agreement for keeping the Project Gutenberg-tm name associated with the work. You can easily comply with the terms of this agreement by keeping this work in the same format with its attached full Project Gutenberg-tm License when you share it without charge with others. 1.D. The copyright laws of the place where you are located also govern what you can do with this work. Copyright laws in most countries are in a constant state of change. If you are outside the United States, check the laws of your country in addition to the terms of this agreement before downloading, copying, displaying, performing, distributing or creating derivative works based on this work or any other Project Gutenberg-tm work. The Foundation makes no representations concerning the copyright status of any work in any country outside the United States. 1.E. Unless you have removed all references to Project Gutenberg: 1.E.1. The following sentence, with active links to, or other immediate access to, the full Project Gutenberg-tm License must appear prominently whenever any copy of a Project Gutenberg-tm work (any work on which the phrase "Project Gutenberg" appears, or with which the phrase "Project Gutenberg" is associated) is accessed, displayed, performed, viewed, copied or distributed: This eBook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org. If you are not located in the United States, you'll have to check the laws of the country where you are located before using this ebook. 1.E.2. If an individual Project Gutenberg-tm electronic work is derived from texts not protected by U.S. copyright law (does not contain a notice indicating that it is posted with permission of the copyright holder), the work can be copied and distributed to anyone in the United States without paying any fees or charges. If you are redistributing or providing access to a work with the phrase "Project Gutenberg" associated with or appearing on the work, you must comply either with the requirements of paragraphs 1.E.1 through 1.E.7 or obtain permission for the use of the work and the Project Gutenberg-tm trademark as set forth in paragraphs 1.E.8 or 1.E.9. 1.E.3. If an individual Project Gutenberg-tm electronic work is posted with the permission of the copyright holder, your use and distribution must comply with both paragraphs 1.E.1 through 1.E.7 and any additional terms imposed by the copyright holder. Additional terms will be linked to the Project Gutenberg-tm License for all works posted with the permission of the copyright holder found at the beginning of this work. 1.E.4. Do not unlink or detach or remove the full Project Gutenberg-tm License terms from this work, or any files containing a part of this work or any other work associated with Project Gutenberg-tm. 1.E.5. Do not copy, display, perform, distribute or redistribute this electronic work, or any part of this electronic work, without prominently displaying the sentence set forth in paragraph 1.E.1 with active links or immediate access to the full terms of the Project Gutenberg-tm License. 1.E.6. You may convert to and distribute this work in any binary, compressed, marked up, nonproprietary or proprietary form, including any word processing or hypertext form. However, if you provide access to or distribute copies of a Project Gutenberg-tm work in a format other than "Plain Vanilla ASCII" or other format used in the official version posted on the official Project Gutenberg-tm web site (www.gutenberg.org), you must, at no additional cost, fee or expense to the user, provide a copy, a means of exporting a copy, or a means of obtaining a copy upon request, of the work in its original "Plain Vanilla ASCII" or other form. Any alternate format must include the full Project Gutenberg-tm License as specified in paragraph 1.E.1. 1.E.7. Do not charge a fee for access to, viewing, displaying, performing, copying or distributing any Project Gutenberg-tm works unless you comply with paragraph 1.E.8 or 1.E.9. 1.E.8. You may charge a reasonable fee for copies of or providing access to or distributing Project Gutenberg-tm electronic works provided that * You pay a royalty fee of 20% of the gross profits you derive from the use of Project Gutenberg-tm works calculated using the method you already use to calculate your applicable taxes. The fee is owed to the owner of the Project Gutenberg-tm trademark, but he has agreed to donate royalties under this paragraph to the Project Gutenberg Literary Archive Foundation. Royalty payments must be paid within 60 days following each date on which you prepare (or are legally required to prepare) your periodic tax returns. Royalty payments should be clearly marked as such and sent to the Project Gutenberg Literary Archive Foundation at the address specified in Section 4, "Information about donations to the Project Gutenberg Literary Archive Foundation." * You provide a full refund of any money paid by a user who notifies you in writing (or by e-mail) within 30 days of receipt that s/he does not agree to the terms of the full Project Gutenberg-tm License. You must require such a user to return or destroy all copies of the works possessed in a physical medium and discontinue all use of and all access to other copies of Project Gutenberg-tm works. * You provide, in accordance with paragraph 1.F.3, a full refund of any money paid for a work or a replacement copy, if a defect in the electronic work is discovered and reported to you within 90 days of receipt of the work. * You comply with all other terms of this agreement for free distribution of Project Gutenberg-tm works. 1.E.9. If you wish to charge a fee or distribute a Project Gutenberg-tm electronic work or group of works on different terms than are set forth in this agreement, you must obtain permission in writing from both the Project Gutenberg Literary Archive Foundation and The Project Gutenberg Trademark LLC, the owner of the Project Gutenberg-tm trademark. Contact the Foundation as set forth in Section 3 below. 1.F. 1.F.1. Project Gutenberg volunteers and employees expend considerable effort to identify, do copyright research on, transcribe and proofread works not protected by U.S. copyright law in creating the Project Gutenberg-tm collection. Despite these efforts, Project Gutenberg-tm electronic works, and the medium on which they may be stored, may contain "Defects," such as, but not limited to, incomplete, inaccurate or corrupt data, transcription errors, a copyright or other intellectual property infringement, a defective or damaged disk or other medium, a computer virus, or computer codes that damage or cannot be read by your equipment. 1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the "Right of Replacement or Refund" described in paragraph 1.F.3, the Project Gutenberg Literary Archive Foundation, the owner of the Project Gutenberg-tm trademark, and any other party distributing a Project Gutenberg-tm electronic work under this agreement, disclaim all liability to you for damages, costs and expenses, including legal fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH DAMAGE. 1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a defect in this electronic work within 90 days of receiving it, you can receive a refund of the money (if any) you paid for it by sending a written explanation to the person you received the work from. If you received the work on a physical medium, you must return the medium with your written explanation. The person or entity that provided you with the defective work may elect to provide a replacement copy in lieu of a refund. If you received the work electronically, the person or entity providing it to you may choose to give you a second opportunity to receive the work electronically in lieu of a refund. If the second copy is also defective, you may demand a refund in writing without further opportunities to fix the problem. 1.F.4. Except for the limited right of replacement or refund set forth in paragraph 1.F.3, this work is provided to you 'AS-IS', WITH NO OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE. 1.F.5. Some states do not allow disclaimers of certain implied warranties or the exclusion or limitation of certain types of damages. If any disclaimer or limitation set forth in this agreement violates the law of the state applicable to this agreement, the agreement shall be interpreted to make the maximum disclaimer or limitation permitted by the applicable state law. The invalidity or unenforceability of any provision of this agreement shall not void the remaining provisions. 1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the trademark owner, any agent or employee of the Foundation, anyone providing copies of Project Gutenberg-tm electronic works in accordance with this agreement, and any volunteers associated with the production, promotion and distribution of Project Gutenberg-tm electronic works, harmless from all liability, costs and expenses, including legal fees, that arise directly or indirectly from any of the following which you do or cause to occur: (a) distribution of this or any Project Gutenberg-tm work, (b) alteration, modification, or additions or deletions to any Project Gutenberg-tm work, and (c) any Defect you cause. Section 2. Information about the Mission of Project Gutenberg-tm Project Gutenberg-tm is synonymous with the free distribution of electronic works in formats readable by the widest variety of computers including obsolete, old, middle-aged and new computers. It exists because of the efforts of hundreds of volunteers and donations from people in all walks of life. Volunteers and financial support to provide volunteers with the assistance they need are critical to reaching Project Gutenberg-tm's goals and ensuring that the Project Gutenberg-tm collection will remain freely available for generations to come. In 2001, the Project Gutenberg Literary Archive Foundation was created to provide a secure and permanent future for Project Gutenberg-tm and future generations. To learn more about the Project Gutenberg Literary Archive Foundation and how your efforts and donations can help, see Sections 3 and 4 and the Foundation information page at www.gutenberg.org Section 3. Information about the Project Gutenberg Literary Archive Foundation The Project Gutenberg Literary Archive Foundation is a non profit 501(c)(3) educational corporation organized under the laws of the state of Mississippi and granted tax exempt status by the Internal Revenue Service. The Foundation's EIN or federal tax identification number is 64-6221541. Contributions to the Project Gutenberg Literary Archive Foundation are tax deductible to the full extent permitted by U.S. federal laws and your state's laws. The Foundation's principal office is in Fairbanks, Alaska, with the mailing address: PO Box 750175, Fairbanks, AK 99775, but its volunteers and employees are scattered throughout numerous locations. Its business office is located at 809 North 1500 West, Salt Lake City, UT 84116, (801) 596-1887. Email contact links and up to date contact information can be found at the Foundation's web site and official page at www.gutenberg.org/contact For additional contact information: Dr. Gregory B. Newby Chief Executive and Director gbnewby@pglaf.org Section 4. Information about Donations to the Project Gutenberg Literary Archive Foundation Project Gutenberg-tm depends upon and cannot survive without wide spread public support and donations to carry out its mission of increasing the number of public domain and licensed works that can be freely distributed in machine readable form accessible by the widest array of equipment including outdated equipment. Many small donations ($1 to $5,000) are particularly important to maintaining tax exempt status with the IRS. The Foundation is committed to complying with the laws regulating charities and charitable donations in all 50 states of the United States. Compliance requirements are not uniform and it takes a considerable effort, much paperwork and many fees to meet and keep up with these requirements. We do not solicit donations in locations where we have not received written confirmation of compliance. To SEND DONATIONS or determine the status of compliance for any particular state visit www.gutenberg.org/donate While we cannot and do not solicit contributions from states where we have not met the solicitation requirements, we know of no prohibition against accepting unsolicited donations from donors in such states who approach us with offers to donate. International donations are gratefully accepted, but we cannot make any statements concerning tax treatment of donations received from outside the United States. U.S. laws alone swamp our small staff. Please check the Project Gutenberg Web pages for current donation methods and addresses. Donations are accepted in a number of other ways including checks, online payments and credit card donations. To donate, please visit: www.gutenberg.org/donate Section 5. General Information About Project Gutenberg-tm electronic works. Professor Michael S. Hart was the originator of the Project Gutenberg-tm concept of a library of electronic works that could be freely shared with anyone. For forty years, he produced and distributed Project Gutenberg-tm eBooks with only a loose network of volunteer support. Project Gutenberg-tm eBooks are often created from several printed editions, all of which are confirmed as not protected by copyright in the U.S. unless a copyright notice is included. Thus, we do not necessarily keep eBooks in compliance with any particular paper edition. Most people start at our Web site which has the main PG search facility: www.gutenberg.org This Web site includes information about Project Gutenberg-tm, including how to make donations to the Project Gutenberg Literary Archive Foundation, how to help produce our new eBooks, and how to subscribe to our email newsletter to hear about new eBooks.