CP3500 Customer options

CP3500
Customer options

SCSI Bus Address
There are three jumpers available for configuration of SCSI ID: E1, E2 and E3. The following table defines the settings:

(The table on this page requires NETSCAPE version 1.1 or later for proper viewing.)

E1 E2 E3 SCSI ID

OUT OUT OUT O

IN OUT OUT 1

OUT IN OUT 2

IN IN OUT 3

OUT OUT IN 4

IN OUT IN 5

OUT IN IN 6

IN IN IN 7

E1	E2	E3	SCSI ID
OUT	OUT	OUT	O
IN	OUT	OUT	1
OUT	IN	OUT	2
IN	IN	OUT	3
OUT	OUT	IN	4
IN	OUT	IN	5
OUT	IN	IN	6
IN	IN	IN	7

Delay Spin: A jumper in the E4 location disables spin up on power-on. Disabling spin up on application of power can also be enabled by settting the DSPN bit in MODE SELECT page 0.

E4	DSPN	RESULT
IN	0	SPIN DISABLED
IN	1	SPIN DISABLED
OUT	0	SPIN UP ON POWER ON
OUT	1	SPIN DISABLED

SCSI parity is always enabled in both directions

Mounting Holes

Side: 6-32 UNC-2B .12 Max. Insertion

Bottom: 6-32 UNC-2B .25Max. Insertion

E1	E2	E3	SCSI ID
OUT	OUT	OUT	O
IN	OUT	OUT	1
OUT	IN	OUT	2
IN	IN	OUT	3
OUT	OUT	IN	4
IN	OUT	IN	5
OUT	IN	IN	6
IN	IN	IN	7

Mounting Holes
Side: 6-32 UNC-2B .12 Max. Insertion
Bottom: 6-32 UNC-2B .25Max. Insertion

E1	E2	E3	SCSI ID
OUT	OUT	OUT	O
IN	OUT	OUT	1
OUT	IN	OUT	2
IN	IN	OUT	3
OUT	OUT	IN	4
IN	OUT	IN	5
OUT	IN	IN	6
IN	IN	IN	7

E1	E2	E3	SCSI ID
OUT	OUT	OUT	O
IN	OUT	OUT	1
OUT	IN	OUT	2
IN	IN	OUT	3
OUT	OUT	IN	4
IN	OUT	IN	5
OUT	IN	IN	6
IN	IN	IN	7