CP30124
Customer Options

The C/D jumper is used to determine whether the drive is a master (drive C) or a slave (drive D). The drive is configured as a master when jumpered and a slave when not jumpered. The ATA/ISA jumper is used when when daisy-chaining two drives. If another manufacturer's drive is being connected to the Conner drive, you may need to install this jumper.

(The table on this page requires NETSCAPE version 1.1 b3 or later to view properly.)

J6
1 +12V
2 Ground
3 Ground
4 +5V

J4
1 +5V
2 +12V
3 Ground

CMOS Drive Parameters
Cylinders 895
Heads 5
Sectors 55
Precomp 0
Landing Zone 895

Mounting Holes
Side: 6-32 UNC-2B .15 MAX. Insertion
Bottom: 6-32 UNC-2B .37 MAX. Insertion