CP30060 SCSI

There are three jumpers available for configuration: E1, E2 and E3. These jumpers are used to select the drive's SCSI ID. The following table defines the settings:

(The table on this page requires NETSCAPE version 1.1 b3 or later to view properly.)

SCSI ID Jumper
0 None
1 E1
2 E2
3 E1&E2
4 E3
5 E1&E3
6 E2&E3

Note: Parity is always Enabled

Mounting Holes
Side: 6-32 UNC-2B .12 MAX. Insertion
Bottom: 6-32 UNC-2B .25 MAX. Insertion